Startup options

Collects all of the characterizations at system start.Screen saver Delay (0 if you want disable)Enables insertion of the screensaver with working values from 0 to 3600 seconds. With value 0 (default), the screensaver is disabled.Unavailable for GF-BOX.Create File Log for exception systemEnables the creation of a Log file to store exceptions.Default: true.Reserved Memory for pages. (MB)Changes the amount of memory available to the pages. Default = 64 MB, but can be changed from a minimum of 32 MB to a maximum of 512 MB.In the case the value will be too high (higher than available free memory), the screen pages won’t start and the following message will be present inside the file /ram2/shell.log:JVMJ9VM015W Initialization error for library j9gc24(5): Failed to allocate default memory spaceJVMEXEX013E Internal VM error: Failed to create Java VMIn the case the value will be too low, the pages couldn’t continue to work correctly. These are the cases:If the error occurs during pages preload, a message on red background will be present on screen centre “Pages out of memory: please increase Reserved Memory for pages option”If the error occurs during normal work, it will be displayed the System Error popup, with a red “P” signal, indicating a pages memory over 90%During normal work, the instant pages memory amount it’s available inside the GF_Project integrated diagnostic tool “SID”.Enable GatewayEnable Gateway (e.g. a router)Gateway IP addressGateway IP address. You must set the gateway address if you need to access other networks. It manages only one gateway.Please: remember to set the subnet mask by gsetup.Its default value is 255.255.255.0 and may be to change the normal activity of Gateway.