Remote system management with GSetup
Starting GSetup on a system where remote systems are configured using GF_ProjectVX, it’s possible to list and check all the remote systems status at once:
The page is divided in the following sections:Deployed pages configuration: all the configured remote systems are listed taking information from the IP address stored inside GF_ProjectVX design project.Active configuration: allows to change the active IP addresses, in order to better fit on the plant configuration, without the need to change GF_ProjectVX application.Remote Status: up to 4 remote systems status are listed, using the configuration information from the above boxes “Remote systems”Available commands:“Copy” button: it takes IP information from the GF_ProjectVX default and activate them, allowing to change them, if needed.“Restore default” button: it deletes the custom IP configuration and activates the GF_ProjectVX default ones.“Change” button: when one item is selected, inside “Active configuration” list, allows to change the associated IP address.“…” buttons belong systems status: opens the advanced diagnostic page for the selected remote system. In case of local address “127.0.0.1” selected, it does nothing.For example, by transferring a complete pages program on another system monitor and choosing the main system IP address at “default” configuration, it’s possible to entirely remote the pages program.The box color belong the remote system listed has the following meaning:Red: the system does not reply.Yellow: trying to communicate. Please wait.Green: the remote system is active and ready.Inside the cyan box a numerical code tell us the system running status. For the meaning, please open the advanced diagnostic page.Inside the pink box there is hardware type and operating system version of the connected remote system.
The page is divided in the following sections:Deployed pages configuration: all the configured remote systems are listed taking information from the IP address stored inside GF_ProjectVX design project.Active configuration: allows to change the active IP addresses, in order to better fit on the plant configuration, without the need to change GF_ProjectVX application.Remote Status: up to 4 remote systems status are listed, using the configuration information from the above boxes “Remote systems”Available commands:“Copy” button: it takes IP information from the GF_ProjectVX default and activate them, allowing to change them, if needed.“Restore default” button: it deletes the custom IP configuration and activates the GF_ProjectVX default ones.“Change” button: when one item is selected, inside “Active configuration” list, allows to change the associated IP address.“…” buttons belong systems status: opens the advanced diagnostic page for the selected remote system. In case of local address “127.0.0.1” selected, it does nothing.For example, by transferring a complete pages program on another system monitor and choosing the main system IP address at “default” configuration, it’s possible to entirely remote the pages program.The box color belong the remote system listed has the following meaning:Red: the system does not reply.Yellow: trying to communicate. Please wait.Green: the remote system is active and ready.Inside the cyan box a numerical code tell us the system running status. For the meaning, please open the advanced diagnostic page.Inside the pink box there is hardware type and operating system version of the connected remote system.